Your city — Вирджиния
Yes?

AutoDimmers

AutoDimmers

What does it do? read more...

 



Auto Dimmer DM-1.2 works with GALLOGEN and with LED Lamp

The autodimmer WORKS both with GALLOGEN and LED Lamp !!! This project is designed to give an au..

10-16 V not more than 5 uA -40°C +50°C without terminals negative

$8.50

Auto Dimmer DM-2.3A

Works with LED !!! This circuit of automatic light dimmer makes possible the controling of the l..

10-16 V not more than 5 mA -40°C +50°C type A negativ

$15.00

Dimmer DM-2.3N (Daewoo Nexia)

РАБОТАЕТ СО СВЕТОДИОДАМИ!!! Монтаж устройства производится в штатные разъемы плафона освещения, ..

10-16 V not more than 5 mA -40°C +50°C type N negativ

$15.00

Dimmer DM-2.3V

WORKS WITH LEDS !!!ATTENTION !!! There are two installation options:1. One dimmer for two lampshades..

10-16 V not more than 5 mA -40°C +50°C type V negativ

$15.00

Dimmer DM-2.4OEM

WORKS WITH LEDS !!! The OEM version is designed for use not only in the ceiling lighting, but also ..

10-16 V not more than 5 mA -40°C +50°C without terminals negativ

$15.00

Диммер DM-2.3L

WORKS WITH LEDS !!! Avtodimmer - controller smooth extinguishing salon light in the car. Монт..

10-16 V not more than 5 mA -40°C +50°C type L negativ

$15.00

Set LC-1.4H + DM-2.3A

Buy a set of devices to share, it is cheaper !!! OTTS module LC-1.4H together with autodimmer ..

$30.00

Showing 1 to 7 of 7 (1 Pages)

FAQ

Autodimmers

1) First of all, check your vehicle's electrical system, namely the relay voltage regulator, and battery status (LEDs are much more sensitive to halogen lamps surges)
2) Dimmer LEDs can affect only when fading occurs directly or fading, and then the eye is almost not noticeable.
1) Ask intelligent companion, or an electrician to do it better
2) If you are in Kiev, we drive up to (pre-contract) we will deliver free next model DM-2.3A, DM-2.3L, DM-2.3N, DM-2.3V

1) Check the insertion of the device according to the scheme in the instructions, and visually verify that you have connected
2) Check if the power is fed to the device (great help multimeter)
3) Do not confuse recheck if the power (+ and -)
4) Check the system voltage (should be between 12-14,5 V)
5) If all of the above does not work, find EXPLANATORY (required) electrician and give him instructions, machines, and can ... money, maybe help
6) call us :-(

Wiring dimmer is in the instruction manual, and usually it is very simple, based on the basic knowledge of electronics and knowledge of any notation able to connect it. Also see below are two basic types of connection
Wiring dimmer aveopodobnyh cars (minus the body of the car is under the screw)

 

Wiring dimmer aveopodobnyh cars (minus the body of the car is under the screw)
Wiring dimmer lanosopodobnyh cars (all three wires in one connector)

 

Wiring dimmer lanosopodobnyh cars (all three wires in one connector)
If nothing happens, then there call us by phones specified in the header

Button programming is as shown below
Button programming
Gray wire without terminals are connected to the control unit central locking system, or drive any door central locking system. They respond only to the positive potential (+) to minus (-), they do not react. You can watch the scheme below
подключение lock и unlock