AutoDimmers

1) First of all, check your vehicle's electrical system, namely the relay voltage regulator, and battery status (LEDs are much more sensitive to halogen lamps surges)
2) Dimmer LEDs can affect only when fading occurs directly or fading, and then the eye is almost not noticeable.

1) Ask intelligent companion, or an electrician to do it better
2) If you are in Kiev, we drive up to (pre-contract) we will deliver free next model DM-2.3A, DM-2.3L, DM-2.3N, DM-2.3V

1) Check the insertion of the device according to the scheme in the instructions, and visually verify that you have connected
2) Check if the power is fed to the device (great help multimeter)
3) Do not confuse recheck if the power (+ and -)
4) Check the system voltage (should be between 12-14,5 V)
5) If all of the above does not work, find EXPLANATORY (required) electrician and give him instructions, machines, and can ... money, maybe help
6) call us :-(

User manual dimmer DM-2.3A 
User manual dimmer DM-2.3L 
User manual dimmer DM-2.4OEM

Wiring dimmer is in the instruction manual, and usually it is very simple, based on the basic knowledge of electronics and knowledge of any notation able to connect it. Also see below are two basic types of connection

 

Wiring dimmer aveopodobnyh cars (minus the body of the car is under the screw)

 

Wiring dimmer lanosopodobnyh cars (all three wires in one connector)
If nothing happens, then there call us by phones specified in the header

Button programming is as shown below

Gray wire without terminals are connected to the control unit central locking system, or drive any door central locking system. They respond only to the positive potential (+) to minus (-), they do not react. You can watch the scheme below