Auto Dimmer DM-2.3A

Works with LED !!!

This circuit of automatic light dimmer makes possible the controling of the lighting system so that it turns on or off slowly.

The installation of the device is maden in a standard plugs of interior light, you don't have to cut standart wiring. You can quickly remove dimmer and restore the functionality of interior light if you need it. The installation of the device needs not more than 10 minutes if you don't want to connect the additional functions and it's easy to do with the help of photos on our forum.

Device features:

• The interior light turns on smoothly after opening the door. The time of smoothly turns on is programmable from 1 to 8 sec.;
• After closing the door the interior lighting smoothly turns off after 10 seconds, if the engine was not on. The time of delay is programmable;
• After closing the door the interior lights turns off smoothly without delay, if the engine was started. The time of smoothly turns off is programmable from 1 to 8 sec.;
• The interior lighting smoothly turns off not practicing delay to the end when starting the engine;
• if you leave the door open, lights will automatically turn off after 20 minutes after opening the door;
• The delay can be programmed from 1 to 30 seconds.
• programmable sensitivity level device to start the engine (four levels);
• optional 1 - including lighting for 30 seconds when arm cars (requires additional wiring UnLock of signaling, positive polarity).
• optional 2 - forced shut down lighting (delay is off) after disarm cars  (requires additional wiring from Lock alarm, positive polarity).

Applies to cars with two narrow (~ 3mm) contacts on the ceiling of the salon.